VM series

Modular Placement Machine VM series (NM-EJM3E, NM-EJM4E) Compact, high-performance entry-level model capable of offering a wide assortment of variations and flexibly coping with various production modes, ranging from high-speed production to high-mix low-volume/prototype production
Features

A wide range of variations to flexibly cope with a wide assortment of production modes

Compact size / High performance

Production support using system software

Specification
Model ID VM101 VM102
Model No. NM-EJM3E NM-EJM4E
PCB dimensions
(mm)
L 50 × W 50 ~ L 330 × W 250 (Single-lane)
Electric source 3-phase AC 200, 220, 380, 400, 420, 480 V
1.3 kVA
Pneumatic source 0.5 ~ 0.8 MPa
100 L /min (A.N.R.) 200 L /min (A.N.R.)
Dimensions (mm) *1 W 830 *2 × D 1 969 *3 × H 1 500 W 1 515 × D 2 070 *3 × H 1 500
Mass 1 500 kg
(Front : Fixed supply unit, Rear : Fixed supply unit without cutting unit)
1 910 kg
(Front : Fixed supply unit plus tray, Rear : Fixed supply unit without cutting unit)
Component
supply
Taping Tape : 4 ~ 56 / 72 / 88 / 104 mm
Max. 80 components *4 (4/8 mm tape) Max.160 components *4 (4/8 mm tape)
Stick Max.20 *5 Max.40 *5
Tray Max.20 Max.20
Model ID VM101 VM102
Placement head Lightweight 16-nozzle head V2 Lightweight 8-nozzle head 4-nozzle head 14-nozzle head
Max. speed *6 42 000 cph (0.086 s / chip) 22 500 cph (0.160 s / chip) 8 200 cph (0.439 s / chip)
6 500 cph (0.554 s / QFP)
32 100 cph (0.112 s / chip)
10 500 cph (0.343 s / QFP)
Placement
accuracy
(Cpk≧1)
±30 μm/chip ±30 μm/ chip
±50 μm/QFP 12 mm Under
±30 μm/QFP 12 mm ~
±30 μm/ QFP ±40 μm/ chip
±50 μm/QFP 12 mm Under
±30 μm/QFP 12 mm ~
Component
dimensions
(mm)
0402 chip ~ L 6 × W 6 × T 3 0402 chip ~
L 45 × W 45 × T 12
or L 100 × W 40 × T 12
0603 chip ~
L 120 × W 90 × T 30
or L 150 × W 25 × T 30
0402 chip*7 ~
L 120 × W 90 × T 28
or L 150 × W 25 × T 28
*1  :  The machine dimensions differ depending on specifications.
*2  :  For the safety of transport openings, you need to select extension conveyor specifications for any VM101 located at the far right/left of a line.
*3  :  The dimensions of VM101 with the fixed supply unit selected for its front and rear sides are the same as the ones of VM102 with the tray feeder and the fixed supply unit selected for its front and rear sides, respectively.
The reel holder and reel box are not included in the dimensions.
*4 : When the double feeder is used as tape feeder.
*5  :  The number of stick model types available for the machine equipped with the single stick feeder.
*6  :  Under our optimal conditions
*7 : Support for 0402 placement is optional.
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.

VM series