Image of the system
Function list
| Function | Function Description |
|---|---|
| Mounting process simulation | In consideration of “error occurrence in production machines," “parts exchange by operators" and “operatorsʼ travel time," it models a mounting floor, and simulates production conditions including multiple mounting lines and off-line setup processes. This ensures highly accurate simulation results. |
| [Optimization function] Production plan optimization |
In consideration of multiple production lines, it optimizes a production plan based on the production conditions set up in [mounting process simulation]. This allows the “production line" and “production order" of each PCB to be calculated / provided automatically. |
| [Optimization function] Setup plan optimization |
It optimizes “off-line setup" sequence according to the production plan developed in [production plan optimization]. This allows automatic calculation / provision of “priorities for setups in multiple lines," “a setup plan that takes into account the shred use of carts" and “effects of an increase / decrease in the setup number of operators on the production plan." *The optimization function of “In-line setup" is currently under development. |
| [Optimization function] number of operators optimization |
Based on the production conditions set up in [Mounting process simulation], it optimizes the number of operators required for each line and setup, allowing you to automatically calculate / provide “the number of the operators required." |
Applicable machine
| Machine series | Model | Machine info entry |
|---|---|---|
| NPM-X/NPM/AM series | NPM-DX, NPM, NPM-D/D2/D3, NPM-TT/TT2, NPM-W/W2/W2S, AM100 | Yes* |
| CM/DT series | CM602-L, CM232-M/212-M, CM101-D, CM402-L/M, CM401-L/M, DT401-F/M | |
| Screen printer | SP60/70/80/18, SPG/SPD/SPV | |
| NPM-VF series | NPM-VF | |
| Panasonicʼs former machine | Machines not included in the ones mentioned above | - |
| Competitorʼs machine | Competitorsʼ machines (loader, screen printer, SPI, placement machine, AOI, reflow, etc.) |
* Because machine information is registered during installation, you will be able to easily configure settings such as registration of the floor configuration of your mounting production lines.
* For details, contact us.
* The current version is limited to the mounting process.
* Prepare PC on your own.