NPM-W2S

Directly connectable to NPM-W2
Support for single-/dual-lane transport

Selection of the mounting head according to production form
Selectable from Lightweight16-/12-/Lightweight8-/3-nozzle head V2

Mutual compatibility with NPM series
Shared use of the placement head/nozzle, tape feeder and feeder cart
*For details, contact our sales representative.

Adoption of 3-nozzle head V2
Capable of a max placement load of 100N.

Model ID			NPM-W2S
PCB dimensions (mm)	Single-lane^*1	Batch mounting	L 50 x W 50 ~ L 750 x W 550
		2-positin mounting	L 50 x W 50 ~ L 350 x W 550
	Dual-lane^*1	Dual transfer (Batch)	L 50 × W 50 ~ L 750 × W 260
		Dual transfer (2-positin)	L 50 × W 50 ~ L 350 × W 260
		Single transfer (Batch)	L 50 × W 50 ~ L 750 × W 510
		Single transfer (2-positin)	L 50 × W 50 ~ L 350 × W 510
Electric source			3-phase AC 200, 220, 380, 400, 420, 480 V 2.0 kVA
Pneumatic source			0.5 MPa, 200 L /min (A.N.R.)
Dimensions ^*2(mm)			W 1 280 ^3 × D 2 477 ^4 × H 1 444 ^*5
Mass			2 390 kg (Only for main body:This differs depending on the option configuration.)

Placement head		Lightweight 16-nozzle head	12-nozzle head	Lightweight 8-nozzle head	3-nozzle head V2
Max. speed		38 500cph (0.094 s/ chip)	32 250cph (0.112 s/chip)	20 800cph (0.173 s/ chip)	8 320cph (0.433 s/ chip) 6 500cph (0.554 s/ QFP)
Placement accuracy (Cpk1)		±30 μm / chip (±25μm / chip ^*6)	±30 μm / chip	± 30 µm/chip ± 30 µm/QFP 12mm to 32mm ± 50 µm/QFP 12mm Under	± 30 µm/QFP
Component dimensions (mm)		03015^{7 8}/0402^*7 chip ~ L 6 x W 6 x T 3	0402^*7 chip ~ L 12 x W 12 x T 6.5	0402^*7 chip ~ L 32 x W 32 x T 12	0603 chip to L 150 x W 25 (diagonal152) x T 30
Component supply	Taping	Tape : 4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm		Tape : 4 to 56 mm	Tape : 4 to 56 / 72 / 88 / 104 mm
		Max.120 (Tape: 4, 8 mm, Small real)		Front/rear feeder cart specifications : Max.120 ( Tape width and feeder are subject to the conditions on the left) Single tray specifications : Max.86 ( Tape width and feeder are subject to the conditions on the left) Twin tray specifications : Max.60 ( Tape width and feeder are subject to the conditions on the left)
	Stick	-		Front/rear feeder cart specifications : Max.15 (Single stick feeder) Single tray specifications : Max.15 (Single stick feeder) Twin tray specifications : Max.15 (Single stick feeder)
	Tray	-		Single tray specifications : Max.20 Twin tray specifications : Max.40

*1	:	Please consult us separately should you connect it to NPM-D3/D2/D. It cannot be connected to NPM-TT and NPM.
*2	:	Only for main body
*3	:	1 880 mm in width if extension conveyors (300 mm) are placed on both sides.
*4	:	Dimension D including tray feeder : 2 618 mm Dimension D including feeder cart : 2 513 mm
*5	:	Excluding the monitor, signal tower and ceiling fan cover.
*6	:	±25 μm placement support option. (Under conditions specified by PSFS)
*7	:	The 03015/0402 chip requires a specific nozzle/feeder.
*8	:	Support for 03015 mm chip placement is optional. (Under conditions specified by PSFS,Placement accuracy : ±30 μm/ chip)

*Placement tact time,inspection time and accuracy values may differ slightly depending on conditions
*Please refer to the specification booklet for details.

NPM-W2S

Features