Halogen-free Ultra-low transmission loss Multi-layer Circuit board materials XPEDION1 | R-5515X, R-5515

Halogen-free Ultra-low transmission loss Circuit board materials R-5515X, R-5515

 

  1. Prepreg enables multi-layer antenna constructions and improves the design flexibility of high-frequency circuit boards; especially suitable for millimeter-wave antennas.
  2. This material achieves higher efficiency and lower loss, with the added benefit of reduced processing costs.

Circuit Board Materials

  • Part Number
  • Application
  • Detailed use
Antenna
Automotive
・Wireless
・Automotive
Antenna(Automotive millimeter-wave radar, Base station), etc.

New part number

  •  

Laminate R-5515X

Prepreg R-5410X

Existing part number

  •  

Laminate R-5515

Prepreg R-5410

Electronic Materials

  • There might be some differences in UL certification conditions between the existing part numbers and the new part numbers. Please contact a sales representative in charge or this form for the detail.
Any letters with parentheses ( ) at the end of a part number are for identification code in our company and are not included in the part numbers registered for UL certification.
suffix

Press Release

Properties

Dk 3.06 Df 0.0021
@14GHz
Tg (DMA)
200°C
Reduce PCB process cost
(vs. PTFE material)

Video

Frequency dependence by Transmission loss

Frequency dependence by Transmission loss

Long-term stability under High temperature (Dk, Df)

Long-term stability under High temperature (Dk, Df)

General properties

Item Test method Condition Unit   XPEDION1  
R-5515X
R-5515
Glass transition temp.(Tg) DMA A °C 200
CTE z-axis α1 IPC-TM-650 2.4.24 A ppm/°C 50*¹
α2 300*¹
T288(with copper) IPC-TM-650 2.4.24.1 A 分 >120*¹
Dielectric constant(Dk) 14GHz Balanced-type circular
disk resonator method		 C-24/23/50 － 3.06
Dissipation factor(Df) 0.0021
Peel strength*² 1/2oz(18µm) IPC-TM-650 2.4.8 A kN/m 0.6

The sample thickness is 0.13mm.
*1 The sample thickness is 0.5mm.
*2 H-VLP2 Copper

Please contact us about the thickness specification.

Our Halogen-free materials are based on JPCA-ES-01-2003 standard and others.
Contain; Chlorine:≤0.09wt%(900ppm), Bromine:≤0.09wt%(900ppm),
Chlorine+Bromine:≤0.15wt%(1500ppm)

The above data are typical values and not guaranteed values.

Related information

[ Product summary ]

[ Data Sheet ]

[ Outgassing Data ]

[ Related products ]

[ Common information ]