NPM-DX

NPM-Dx

Panasonic's next generation of mounting production (X series) concept
“Smart manufacturing"

More line throughput, better quality and lower cost with fully automated mounting system floor 

Features

Stable operation based on the autonomic function - Autonomous line control
APC system and automatic recovery option

Labor-saving, improved utilization - Concentrated control
Floor management system and remote operation option

Reduced work variations - Navigation/automated items
Feeder setup navigation, component supply navigation and automated items

NPM-DX SYSTEM

Specification
Model ID
NPM-DX

PCB dimensions (mm)

*When the long spec. conveyor is selected

Single-lane mode L 50 × W 50 ~ L 510 × W 590
Dual-lane mode L 50 × W 50 ~ L 510 × W 300

PCB exchange time

*When the short spec. conveyor is selected

2.1 s ( L 275 mm or less)
4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications.
Electric source 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic source *1 Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm) W 1 665 *2 × D 2 570 *3 × H 1 444 *4
Mass 3 600 kg (Only for main body:This differs depending on the option configuration.)
Placement head Lightweight 16-nozzle head V2
(Per head)
Lightweight 8-nozzle head
(Per head)
4-nozzle head
(Per head)
Max. speed 46 200 cph
(0.078 s/ chip)
24 000 cph
(0.150 s/ chip)
8 500 cph (0.424 s/ chip)
8 000 cph (0.450 s/ QFP)
Placement accuracy (Cpk≧1) ±25 μm/Square chip ±25 μm/ Square chip
±40 μm/QFP 12 mm Under
±25 μm/QFP 12 mm to 32 mm
±20 μm/ QFP
Component dimensions (mm) 0201 component *5*6 / 03015 component *5
0402 component *5 to L 6 x W 6 x T 3
0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30
Component
supply
Taping Tape:4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm Tape:4 ~56 /72 / 88 / 104 mm
4, 8 mm tape:Max. 136
Stick Max. 32 (Single stick feeder)

*1 : Only for main body
*2: 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.
*3: Dimension D including feeder cart
*4: Excluding the monitor, signal tower and ceiling fan cover.
*5: 0201/03015/0402 component requires a specific nozzle/tape feeder.
*6: 0201 component placement is optional. (Under conditions specified by Panasonic)
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.

NPM-DX