A wide range of variations
The most suitable module can be selected to place components from microchips to odd-shaped components, as well as depending on the products and the production volume.
*Heads configuration can be changed after purchase.
Machine configuration
| Configuration type | 12 nozzles / 12 nozzles |
12 nozzles / 8 nozzles |
8 nozzles / 8 nozzles |
12 nozzles / 3 nozzles |
8 nozzles / 3 nozzles |
3 nozzles / 3 nozzles |
||
|---|---|---|---|---|---|---|---|---|
| Head combination | A | Type A-2 | Type A-1 | Type A-0 | - | - | - | |
| B | - | - | - | - | - | Type A-0 | ||
| C | - | - | - | Type C-1 | Type C-0 | - | ||
| Direct tray support | One side | D | - | Type D-3 | Type D-2 | Type D-1 | Type D-0 | - |
| E | - | - | - | - | - | Type E-0 | ||
| Both sides | F | - | - | Type F-2 | - | Type F-1 | Type F-0 | |
Improves actual productivity with lighter high-speed head and new optimization
Actual productivity ( IPC9850 )
69 500 cph (Type A-2)
New high-flexibility 8 nozzles head
Further component handling capability
50mm and a large size connector (100× 50mm),have become mountable.The 3D sensor and direct tray feeder can be installed as before providing superior handling capabilities for odd-shaped components.
Improves area productivity with compact feeder carts
200mm decrease in Feeder cart size
- Area productivity has increased by 17%
- Equipment maintenance has improved
*The Compact Feeder Cart has compatibility with Conventional Feeder Cart. Both types of the Feeder Carts can be used at the same time.
Increases placement reliability by the 3D sensor
- Component bring-back check function
- Component thickness measurement function after components are changed
- Nozzle tip check function
Component thickness measurement function after components are changed
High-quality placement for IC component via the 3D sensor
High-speed detection via batch scanning.
High-speed detection via batch scanning.
Highly versatile unit accurately transfers solder/flux for PoP top packaging/C4 mounting on the bump side
High-speed PoP placement
Maintenance through easy operation
Changeable film thickness
Programmable squeegee gap using data
Changeable on film thickness each component
| Max.dimension | |
| 8 nozzles | 20mm |
| 3 nozzles | 38mm |
*High-speed heads (12 nozzles) are not supported.
Supply Units
Feeder cart
Type feeder (8 mm~104 mm)
Stick feeder
Automation Units
Automatic tape splicing unit
Feeder maintenance unit