Industrial Solutions
    Panasonic Factory Solutions>[Electronic Component Mounting] Insertion Machine>RG131
    Global HomeJapanese

    Main Contents begins from here.

    FA top FA Products
    Company Profile Catalog Data in Chinese FA Exhibition
    Electronic Component Mounting / PCB Assembly / Equipment and system software for realizing a high-density surface mountingInsertion Machine

    RG131

    Features
    More Infomation
    Higher insertion speed and operation efficiency improve productivity
    Insertion-pitch of either 2-pitch spec. ( 2.5 mm / 5.0 mm ) or 3-pitch spec. ( 2.5 mm / 5.0 mm / 7.5 mm ) can be selected.
    Large-size components can be inserted at 3 pitches ( 2.5 mm / 5.0 mm / 7.5 mm ) at a rate of between 0.25 s and 0.6 s per component.
    The use of guide pins makes high-density insertion possible when there is any gap between components.
    Complete self-correction function ensures high reliability
    Complete self-offset function covering the entire surface of the PC board ensures accurate insertion.
    With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved.
    A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large-size components.
    The two-separate component supply unit enable components to be exchanged and replenished during operation. (ex. exchange mode)
    Reduction of running cost
    Expendable parts of the RG131 such as the Anvil blade, lead cutter, chuck rubber and pusher rubber are compatible with those of the RHSG.
    The transfer system, the XY table, the controller and the driver can be used in any one of the Insertion machine series.
    The setup and maintenance operations are standardized.
    Operability enhancement
    Identical control panels are setup at the front side and the rear side of the RG131 so that operability can be significantly improved.
    (Standard specification)
    The liquid crystal touch panel is employed for the control panel and easy operation can be provided by the operation guidance indication.
    Japanese, English or Chinese can be selected by one touch operation as the language used for the screen displays.
    The new controller can store up to 200 types of programs. Data can be input to and output from high-capacity SD memory cards
    as well as floppy disks.
    NC data of our conventional equipment (RH series) can be used by the RG131.
    Setup support functions that display the component layout of the component supply unit on the screen are provided.
    Maintenance support functions that display information of regular maintenance time and operation content are provided.
    Global transformer incorporated
    Global transformer compatible with 220, 380, 400, 420, and 480 Voltages. No external transformer necessary.
    Specfication
    Model ID RG131
    Model No. NM-EJR3A NM-EJR4A
    PCB dimensions (mm) *1 L 50 mm x W 50 mm to L 508 mm x W 381 mm
    Max.speed 0.25 s/component to 0.6 s/component
    No.of component inputs 40 80 (Connection mode), 40 + 40 (Exchange mode)
    Applicable components Pitch 2.5 mm, 5.0 mm, 7.5 mm
    Height Hn=Max. 26 mm Diameter D=Max. 18 mm
    Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
    PCB exchange time about 2 s to about 4 s (Room temperature 20°C)
    Insertion direction 4 directions (0 °, 90 °, -90 °, 180 °)
    Electric source 3-phase AC 200 V, 3.5 kVA
    Pneumatic source 0.5 MPa, 80 L/min (A.N.R.)
    Dimensions (mm) W 3 200 mm x D 2 417 mm x H 1 620 mm *3
    Mass 2 250 kg 2 350 kg
    *1: On condition
    *2: Compatible with 220 / 380 / 400 / 420 / 480 V
    *3: Excluding signal tower
    * Values such as Max.speed may vary depending on operating conditions.
    * Please refer to the “Specification” booklet for details.