Servo capacity motor selection software | FA, Industrial application

Text begins from here.

FA, Industrial application top page

Back Number

December 22, 2009

Software Ver.3.1.0.3, Data Ver.1.1.0.3
- Added new models in association with the release of A5 series and A5E series.
- This statement is about the improvement regarding with install error of
M-Select. Because there were casese where M-Select cannot be installed when decimal point is defined by "," at PC setting, M-Select installer were improve to be able to installed in cases where decimel point is either "." or ",".

Feature

This servo capacity motor selection software is for selecting motor capacity of Panasonic AC Servo Motor MINAS Series. And it includes functions of selecting option and downloading CAD data at same time.

* In order to download CAD data, "Desgin support data(CD-ROM: 2D/3D CAD data·Servo motor capacity selection software·others)Ver.14.0" or upper version is needed. Please ask us for it if you need it.
It will be released soon.

Since this new software has new method, it has possibility to calculate all mechanical factors of moving part in machine truly instead of making all mechnical factors each equivalent model.
The result of motor capacity selection can show the applicable options. Therefore, you can select which you need. And also based upon calculation result, you can download CAD data of the selected motor.

*	This software uses "." as decimel point. Please confirm that the Windows setting in the "Language" control panel should specify "." as decimal point. If not, the software will not make the correct calculation.
	Software Ver.3.1.0.3, Data Ver.1.1.0.5 [10.4MB] Added new models in A5 series and A5E series.

Installation
* Please install after uninstalling in case this software has already installed.
* It is possible to use it togeher with the current motor capacity selection software "Mselect Ver.2".

Please execute the pressed file(self-unpack type) "mselect3_1E_Setup.exe" and load the unpacked to a folder, then execute the file "setup.exe".

Uninstallation
* Please proceed with the followings in order to unstall motor capacity selection software.

Please select "Mselect3J" out of "Application addtion and deletion" in Start/Set/Control Panel and push "Deletion" button.

operattion environment
Personal computor

DOS/V
CPU pentium 500MHz or more
Memory 128MB or more
Harddisk capacity availability 100MB or more
OS: WindowsXP(English) SP2 or later, or WindowsVista(English) SP1 or later, or Windows7(English)

Display

1024 x 768(SVGA) or more
256 colors or more

* However, it doesen't mean we guarantee all personal computors.
* Please check it by yourself in case of using the hard ware which is not recommended.

Escape clause
The producer, PanasonicMotor Company and the rightful claimant are not liable for any accident caused by the use of this software in any case.